HTS heading 7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel — 47 codes under this heading, with the duty on each.
| Code | Description | General rate | Units |
|---|---|---|---|
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel + Ch. 99 | not stated | — |
| 7228.10.00 | Bars and rods, of high-speed steel + Ch. 99 | Free | — |
| 7228.10.00.10 | Not cold-formed + Ch. 99 | Free (inherited from 7228.10.00) | kg |
| 7228.10.00.30 | With a maximum cross-sectional dimension of less than 18 mm + Ch. 99 | Free (inherited from 7228.10.00) | kg |
| 7228.10.00.60 | With a maximum cross-sectional dimension of 18 mm or more + Ch. 99 | Free (inherited from 7228.10.00) | kg |
| 7228.20 | Bars and rods, of silico-manganese steel + Ch. 99 | not stated | — |
| 7228.20.10.00 | Not cold-formed + Ch. 99 | Free | kg |
| 7228.20.50.00 | Cold-formed + Ch. 99 | Free | kg |
| 7228.30 | Of tool steel (other than high-speed steel) + Ch. 99 | not stated | — |
| 7228.30.20.00 | Of ball-bearing steel + Ch. 99 | Free | kg |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed + Ch. 99 | Free | kg |
| 7228.30.60.00 | Other + Ch. 99 | Free | kg |
| 7228.30.80 | Other + Ch. 99 | Free | — |
| 7228.30.80.05 | Of high-nickel alloy steel + Ch. 99 | Free (inherited from 7228.30.80) | kg |
| 7228.30.80.10 | Concrete reinforcing bars and rods + Ch. 99 | Free (inherited from 7228.30.80) | kg |
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm + Ch. 99 | Free (inherited from 7228.30.80) | kg |
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm + Ch. 99 | Free (inherited from 7228.30.80) | kg |
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm + Ch. 99 | Free (inherited from 7228.30.80) | kg |
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm + Ch. 99 | Free (inherited from 7228.30.80) | kg |
| 7228.40.00.00 | Other bars and rods, not further worked than forged + Ch. 99 | Free | kg |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished + Ch. 99 | not stated | — |
| 7228.50.10 | Of tool steel (other than high-speed steel) + Ch. 99 | Free | — |
| 7228.50.10.10 | Of ball-bearing steel + Ch. 99 | Free (inherited from 7228.50.10) | kg |
| 7228.50.10.20 | Of round or rectangular cross section with surfaces ground, milled or polished + Ch. 99 | Free (inherited from 7228.50.10) | kg |
| 7228.50.10.40 | Other + Ch. 99 | Free (inherited from 7228.50.10) | kg |
| 7228.50.10.60 | Of round or rectangular cross section with surfaces ground, milled or polished + Ch. 99 | Free (inherited from 7228.50.10) | kg |
| 7228.50.10.80 | Other + Ch. 99 | Free (inherited from 7228.50.10) | kg |
| 7228.50.50 | Other + Ch. 99 | Free | — |
| 7228.50.50.05 | Of high-nickel alloy steel + Ch. 99 | Free (inherited from 7228.50.50) | kg |
| 7228.50.50.15 | With a diameter or cross section measuring less than 76 mm + Ch. 99 | Free (inherited from 7228.50.50) | kg |
| 7228.50.50.40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm + Ch. 99 | Free (inherited from 7228.50.50) | kg |
| 7228.50.50.70 | With a diameter or cross section exceeding 228 mm + Ch. 99 | Free (inherited from 7228.50.50) | kg |
| 7228.60 | Other bars and rods + Ch. 99 | not stated | — |
| 7228.60.10 | Of tool steel (other than high-speed steel) + Ch. 99 | Free | — |
| 7228.60.10.30 | Of ball-bearing steel + Ch. 99 | Free (inherited from 7228.60.10) | kg |
| 7228.60.10.60 | Other + Ch. 99 | Free (inherited from 7228.60.10) | kg |
| 7228.60.60.00 | Not cold-formed + Ch. 99 | Free | kg |
| 7228.60.80.00 | Cold-formed + Ch. 99 | Free | kg |
| 7228.70 | Angles, shapes and sections + Ch. 99 | not stated | — |
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced + Ch. 99 | Free | — |
| 7228.70.30.10 | U, I, H and T sections + Ch. 99 | Free (inherited from 7228.70.30) | kg |
| 7228.70.30.20 | Angles + Ch. 99 | Free (inherited from 7228.70.30) | kg |
| 7228.70.30.41 | Other + Ch. 99 | Free (inherited from 7228.70.30) | kg |
| 7228.70.30.60 | Angles + Ch. 99 | Free (inherited from 7228.70.30) | kg |
| 7228.70.30.81 | Other + Ch. 99 | Free (inherited from 7228.70.30) | kg |
| 7228.70.60.00 | Other + Ch. 99 | Free | kg |
| 7228.80.00.00 | Hollow drill bars and rods + Ch. 99 | Free | kg |
25 of these lines state no rate of their own and inherit one from the line above, which is how the schedule is read. Each says which line it came from.
Additional duties may apply
47 lines here reference Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate and depend on where the goods were made. What those provisions are.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Classification and the duties that finally apply to a shipment are a licensed customs broker's call.