HTS 7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 7219.11.00 | Of a thickness exceeding 10 mm | — | Free |
| 7219.11.00.30 | Of a width not exceeding 1575 mm | kg | Free |
| 7219.11.00.60 | Of a width exceeding 1575 mm | kg | Free |
| 7219.12.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | — | Free |
| 7219.12.00.02 | Not annealed or not pickled | kg | Free |
| 7219.12.00.06 | Of high-nickel alloy steel | kg | Free |
| 7219.12.00.21 | Of a width not exceeding 1575 mm | kg | Free |
| 7219.12.00.26 | Of a width exceeding 1575 mm | kg | Free |
| 7219.12.00.51 | Of a width not exceeding 1575 mm | kg | Free |
| 7219.12.00.56 | Of a width exceeding 1575 mm | kg | Free |
| 7219.12.00.66 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7219.12.00.71 | Other | kg | Free |
| 7219.12.00.81 | Other | kg | Free |
| 7219.13.00 | Of a thickness of 3 mm or more but less than 4.75 mm | — | Free |
| 7219.13.00.02 | Not annealed or not pickled | kg | Free |
| 7219.13.00.31 | Of a width of 1370 mm or more | kg | Free |
| 7219.13.00.51 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7219.13.00.71 | Other | kg | Free |
| 7219.13.00.81 | Other | kg | Free |
| 7219.14.00 | Of a thickness of less than 3 mm | — | Free |
| 7219.14.00.30 | Of a width of 1370 mm or more | kg | Free |
| 7219.14.00.65 | Of high-nickel alloy steel | kg | Free |
| 7219.14.00.90 | Other | kg | Free |
| 7219.21.00 | Of a thickness exceeding 10 mm | — | Free |
| 7219.21.00.05 | Of high-nickel alloy steel | kg | Free |
| 7219.21.00.20 | Of a width not exceeding 1575 mm | kg | Free |
| 7219.21.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | kg | Free |
| 7219.21.00.60 | Of a width exceeding 1880 mm | kg | Free |
| 7219.22.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | — | Free |
| 7219.22.00.05 | Of high-nickel alloy steel | kg | Free |
| 7219.22.00.15 | Of a width not exceeding 1575 mm | kg | Free |
| 7219.22.00.20 | Of a width exceeding 1575 mm but not exceeding 1880 mm | kg | Free |
| 7219.22.00.25 | Of a width exceeding 1880 mm | kg | Free |
| 7219.22.00.35 | Of a width not exceeding 1575 mm | kg | Free |
| 7219.22.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | kg | Free |
| 7219.22.00.45 | Of a width exceeding 1880 mm | kg | Free |
| 7219.22.00.70 | Of a width not exceeding 1575 mm | kg | Free |
| 7219.22.00.75 | Of a width exceeding 1575 mm but not exceeding 1880 mm | kg | Free |
| 7219.22.00.80 | Of a width exceeding 1880 mm | kg | Free |
| 7219.23.00 | Of a thickness of 3 mm or more but less than 4.75 mm | — | Free |
| 7219.23.00.30 | Of a width of 1370 mm or more | kg | Free |
| 7219.23.00.60 | Other | kg | Free |
| 7219.24.00 | Of a thickness of less than 3 mm | — | Free |
| 7219.24.00.30 | Of a width of 1370 mm or more | kg | Free |
| 7219.24.00.60 | Other | kg | Free |
| 7219.31.00 | Of a thickness of 4.75 mm or more | — | Free |
| 7219.31.00.10 | In coils | kg | Free |
| 7219.31.00.50 | Not in coils | kg | Free |
| 7219.32.00 | Of a thickness of 3 mm or more but less than 4.75 mm | — | Free |
| 7219.32.00.05 | Of high-nickel alloy steel | kg | Free |
| 7219.32.00.20 | Containing more than 0.5 percent by weight of nickel | kg | Free |
| 7219.32.00.25 | Other | kg | Free |
| 7219.32.00.35 | Of high-nickel alloy steel | kg | Free |
| 7219.32.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7219.32.00.38 | Other | kg | Free |
| 7219.32.00.42 | Containing less than 15 percent by weight of chromium | kg | Free |
| 7219.32.00.44 | Other | kg | Free |
| 7219.32.00.45 | Of a width of 1370 mm or more | kg | Free |
| 7219.32.00.60 | Other | kg | Free |
| 7219.33.00 | Of a thickness exceeding 1 mm but less than 3 mm | — | Free |
| 7219.33.00.05 | Of high-nickel alloy steel | kg | Free |
| 7219.33.00.20 | Containing more than 0.5 percent by weight of nickel | kg | Free |
| 7219.33.00.25 | Other | kg | Free |
| 7219.33.00.35 | Of high-nickel alloy steel | kg | Free |
| 7219.33.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7219.33.00.38 | Other | kg | Free |
| 7219.33.00.42 | Containing less than 15 percent by weight of chromium | kg | Free |
| 7219.33.00.44 | Other | kg | Free |
| 7219.33.00.45 | Of a width of 1370 mm or more | kg | Free |
| 7219.33.00.70 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | kg | Free |
| 7219.33.00.80 | Other | kg | Free |
| 7219.34.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | — | Free |
| 7219.34.00.05 | Of high-nickel alloy steel | kg | Free |
| 7219.34.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7219.34.00.25 | Other | kg | Free |
| 7219.34.00.30 | Containing less than 15 percent by weight of chromium | kg | Free |
| 7219.34.00.35 | Other | kg | Free |
| 7219.34.00.50 | Not in coils | kg | Free |
| 7219.35.00 | Of a thickness of less than 0.5 mm | — | Free |
| 7219.35.00.05 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7219.35.00.15 | Other | kg | Free |
| 7219.35.00.30 | Containing less than 15 percent by weight of chromium | kg | Free |
| 7219.35.00.35 | Other | kg | Free |
| 7219.35.00.50 | Not in coils | kg | Free |
| 7219.90.00 | Other | — | Free |
| 7219.90.00.10 | Of high-nickel alloy steel | kg | Free |
| 7219.90.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7219.90.00.25 | Other | kg | Free |
| 7219.90.00.60 | Containing less than 15 percent by weight of chromium | kg | Free |
| 7219.90.00.80 | Other | kg | Free |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 7219 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.