HTS heading 8458
Lathes (including turning centers) for removing metal — 31 codes under this heading, with the duty on each.
| Code | Description | General rate | Units |
|---|---|---|---|
| 8458 | Lathes (including turning centers) for removing metal + Ch. 99 | not stated | — |
| 8458.11.00 | Numerically controlled + Ch. 99 | 4.4% | — |
| 8458.11.00.05 | Used or rebuilt + Ch. 99 | 4.4% (inherited from 8458.11.00) | No. |
| 8458.11.00.10 | Multiple spindle + Ch. 99 | 4.4% (inherited from 8458.11.00) | No. |
| 8458.11.00.30 | With a power rating of less than 18.65 kW + Ch. 99 | 4.4% (inherited from 8458.11.00) | No. |
| 8458.11.00.50 | With a power rating of 18.65 kW or greater but not exceeding 37.3 kW + Ch. 99 | 4.4% (inherited from 8458.11.00) | No. |
| 8458.11.00.90 | With a power rating exceeding 37.3 kW + Ch. 99 | 4.4% (inherited from 8458.11.00) | No. |
| 8458.19.00 | Other + Ch. 99 | 4.4% | — |
| 8458.19.00.10 | Used or rebuilt + Ch. 99 | 4.4% (inherited from 8458.19.00) | No. |
| 8458.19.00.20 | Other, valued under $3,025 each + Ch. 99 | 4.4% (inherited from 8458.19.00) | No. |
| 8458.19.00.30 | Engine or toolroom lathes + Ch. 99 | 4.4% (inherited from 8458.19.00) | No. |
| 8458.19.00.50 | Single spindle + Ch. 99 | 4.4% (inherited from 8458.19.00) | No. |
| 8458.19.00.70 | Multiple spindle + Ch. 99 | 4.4% (inherited from 8458.19.00) | No. |
| 8458.19.00.90 | Other + Ch. 99 | 4.4% (inherited from 8458.19.00) | No. |
| 8458.91 | Numerically controlled + Ch. 99 | not stated | — |
| 8458.91.10 | Vertical turret lathes + Ch. 99 | 4.2% | — |
| 8458.91.10.40 | Used or rebuilt + Ch. 99 | 4.2% (inherited from 8458.91.10) | No. |
| 8458.91.10.60 | Multiple spindle + Ch. 99 | 4.2% (inherited from 8458.91.10) | No. |
| 8458.91.10.80 | Other + Ch. 99 | 4.2% (inherited from 8458.91.10) | No. |
| 8458.91.50 | Other + Ch. 99 | 4.4% | — |
| 8458.91.50.40 | Used or rebuilt + Ch. 99 | 4.4% (inherited from 8458.91.50) | No. |
| 8458.91.50.50 | Multiple spindle + Ch. 99 | 4.4% (inherited from 8458.91.50) | No. |
| 8458.91.50.70 | Other + Ch. 99 | 4.4% (inherited from 8458.91.50) | No. |
| 8458.99 | Other + Ch. 99 | not stated | — |
| 8458.99.10 | Vertical turret lathes + Ch. 99 | 4.2% | — |
| 8458.99.10.10 | Used or rebuilt + Ch. 99 | 4.2% (inherited from 8458.99.10) | No. |
| 8458.99.10.50 | Other + Ch. 99 | 4.2% (inherited from 8458.99.10) | No. |
| 8458.99.50 | Other + Ch. 99 | 4.4% | — |
| 8458.99.50.30 | Used or rebuilt + Ch. 99 | 4.4% (inherited from 8458.99.50) | No. |
| 8458.99.50.60 | Other, valued under $3,025 each + Ch. 99 | 4.4% (inherited from 8458.99.50) | No. |
| 8458.99.50.90 | Other + Ch. 99 | 4.4% (inherited from 8458.99.50) | No. |
22 of these lines state no rate of their own and inherit one from the line above, which is how the schedule is read. Each says which line it came from.
Additional duties may apply
31 lines here reference Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate and depend on where the goods were made. What those provisions are.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Classification and the duties that finally apply to a shipment are a licensed customs broker's call.