HTS heading 7606
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm — 30 codes under this heading, with the duty on each.
| Code | Description | General rate | Units |
|---|---|---|---|
| 7606 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm + Ch. 99 | not stated | — |
| 7606.11 | Of aluminum, not alloyed + Ch. 99 | not stated | — |
| 7606.11.30 | Not clad + Ch. 99 | 3% | — |
| 7606.11.30.30 | With a thickness of more than 6.3 mm + Ch. 99 | 3% (inherited from 7606.11.30) | kg |
| 7606.11.30.60 | With a thickness of 6.3 mm or less + Ch. 99 | 3% (inherited from 7606.11.30) | kg |
| 7606.11.60.00 | Clad + Ch. 99 | 2.7% | kg |
| 7606.12 | Of aluminum alloys + Ch. 99 | not stated | — |
| 7606.12.30 | Not clad + Ch. 99 | 3% | — |
| 7606.12.30.15 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter + Ch. 99 | 3% (inherited from 7606.12.30) | kg |
| 7606.12.30.25 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter + Ch. 99 | 3% (inherited from 7606.12.30) | kg |
| 7606.12.30.35 | Other + Ch. 99 | 3% (inherited from 7606.12.30) | kg |
| 7606.12.30.45 | Body stock + Ch. 99 | 3% (inherited from 7606.12.30) | kg |
| 7606.12.30.55 | Lid stock + Ch. 99 | 3% (inherited from 7606.12.30) | kg |
| 7606.12.30.91 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter + Ch. 99 | 3% (inherited from 7606.12.30) | kg |
| 7606.12.30.96 | Other + Ch. 99 | 3% (inherited from 7606.12.30) | kg |
| 7606.12.60.00 | Clad + Ch. 99 | 6.5% | kg |
| 7606.91 | Of aluminum, not alloyed + Ch. 99 | not stated | — |
| 7606.91.30 | Not clad + Ch. 99 | 3% | — |
| 7606.91.30.55 | With a thickness of more than 6.3 mm + Ch. 99 | 3% (inherited from 7606.91.30) | kg |
| 7606.91.30.95 | With a thickness of 6.3 mm or less + Ch. 99 | 3% (inherited from 7606.91.30) | kg |
| 7606.91.60 | Clad + Ch. 99 | 2.7% | — |
| 7606.91.60.55 | With a thickness of more than 6.3 mm + Ch. 99 | 2.7% (inherited from 7606.91.60) | kg |
| 7606.91.60.95 | With a thickness of 6.3 mm or less + Ch. 99 | 2.7% (inherited from 7606.91.60) | kg |
| 7606.92 | Of aluminum alloys + Ch. 99 | not stated | — |
| 7606.92.30 | Not clad + Ch. 99 | 3% | — |
| 7606.92.30.25 | With a thickness of more than 6.3 mm + Ch. 99 | 3% (inherited from 7606.92.30) | kg |
| 7606.92.30.35 | With a thickness of 6.3 mm or less + Ch. 99 | 3% (inherited from 7606.92.30) | kg |
| 7606.92.60 | Clad + Ch. 99 | 6.5% | — |
| 7606.92.60.55 | With a thickness of more than 6.3 mm + Ch. 99 | 6.5% (inherited from 7606.92.60) | kg |
| 7606.92.60.95 | With a thickness of 6.3 mm or less + Ch. 99 | 6.5% (inherited from 7606.92.60) | kg |
17 of these lines state no rate of their own and inherit one from the line above, which is how the schedule is read. Each says which line it came from.
Additional duties may apply
30 lines here reference Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate and depend on where the goods were made. What those provisions are.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Classification and the duties that finally apply to a shipment are a licensed customs broker's call.