HTS 8482
Ball or roller bearings, and parts thereof
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 8482.10 | Ball bearings | — | see above |
| 8482.10.10 | Ball bearings with integral shafts | — | 2.4% |
| 8482.10.10.40 | Bearings having an outside diameter not over 30 mm | No., kg | 2.4% |
| 8482.10.10.80 | Other | No., kg | 2.4% |
| 8482.10.50 | Other | — | 9% |
| 8482.10.50.04 | Unground bearings | No. | 9% |
| 8482.10.50.08 | Thrust bearings | No., kg | 9% |
| 8482.10.50.12 | Linear bearings | No., kg | 9% |
| 8482.10.50.16 | Flanged | No., kg | 9% |
| 8482.10.50.24 | Other | No., kg | 9% |
| 8482.10.50.28 | Other | No., kg | 9% |
| 8482.10.50.32 | Maximum or full capacity type | No., kg | 9% |
| 8482.10.50.36 | Under 9 mm | No., kg | 9% |
| 8482.10.50.44 | 9 mm and over but not over 30 mm | No., kg | 9% |
| 8482.10.50.48 | Over 30 mm but not over 52 mm | No., kg | 9% |
| 8482.10.50.52 | Over 52 mm but not over 100 mm. | No., kg | 9% |
| 8482.10.50.56 | Over 100 mm | No., kg | 9% |
| 8482.10.50.60 | Double row ball bearings | No., kg | 9% |
| 8482.10.50.64 | Other | No., kg | 9% |
| 8482.10.50.68 | Other | No., kg | 9% |
| 8482.20.00 | Tapered roller bearings, including cone and tapered roller assemblies | — | 5.8% |
| 8482.20.00.20 | Flanged | No., kg | 5.8% |
| 8482.20.00.30 | Other | No., kg | 5.8% |
| 8482.20.00.40 | With cups having an outside diameter not exceeding 102 mm | No., kg | 5.8% |
| 8482.20.00.61 | With cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | No., kg | 5.8% |
| 8482.20.00.64 | With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm | No., kg | 5.8% |
| 8482.20.00.67 | Other | No., kg | 5.8% |
| 8482.20.00.70 | For cups having an outside diameter not exceeding 102 mm | No., kg | 5.8% |
| 8482.20.00.81 | For cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | No., kg | 5.8% |
| 8482.20.00.90 | Other | No., kg | 5.8% |
| 8482.30.00 | Spherical roller bearings | — | 5.8% |
| 8482.30.00.40 | Single row | No., kg | 5.8% |
| 8482.30.00.80 | Other | No., kg | 5.8% |
| 8482.40.00.00 | Needle roller bearings, including cage and needle roller assemblies | No., kg | 5.8% |
| 8482.50.00.00 | Other cylindrical roller bearings, including cage and roller assemblies | No., kg | 5.8% |
| 8482.80.00 | Other, including combined ball/roller bearings | — | 5.8% |
| 8482.80.00.20 | Combined ball and spherical roller bearings | No., kg | 5.8% |
| 8482.80.00.40 | Combined ball and needle roller bearings | No., kg | 5.8% |
| 8482.80.00.60 | Combined ball and other cylindrical roller bearings | No., kg | 5.8% |
| 8482.80.00.80 | Other | No., kg | 5.8% |
| 8482.91.00 | Balls, needles and rollers | — | 4.4% |
| 8482.91.00.10 | Of alloy steel | kg | 4.4% |
| 8482.91.00.15 | Of copper or copper alloys as described in statistical note 8 to this chapter | kg | 4.4% |
| 8482.91.00.30 | Other | kg | 4.4% |
| 8482.91.00.40 | Needles | kg | 4.4% |
| 8482.91.00.50 | Tapered rollers | kg | 4.4% |
| 8482.91.00.70 | Spherical rollers | kg | 4.4% |
| 8482.91.00.80 | Other cylindrical rollers | kg | 4.4% |
| 8482.91.00.90 | Other | kg | 4.4% |
| 8482.99 | Other | — | see above |
| 8482.99.05.00 | For ball bearings | No., kg | 9.9% |
| 8482.99.15 | For tapered roller bearings | — | 5.8% |
| 8482.99.15.50 | Having an outside diameter not exceeding 203 mm | No., kg | 5.8% |
| 8482.99.15.70 | Other | No., kg | 5.8% |
| 8482.99.15.80 | Other | No., kg | 5.8% |
| 8482.99.25 | Other | — | 5.8% |
| 8482.99.25.20 | For spherical roller bearings | No., kg | 5.8% |
| 8482.99.25.40 | For needle bearings | No., kg | 5.8% |
| 8482.99.25.60 | For other cylindrical roller bearings | No., kg | 5.8% |
| 8482.99.25.80 | Other | No., kg | 5.8% |
| 8482.99.35.00 | Parts of ball bearings (including parts of ball bearings with integral shafts) | kg | 9.9% |
| 8482.99.45.00 | Parts of tapered roller bearings | kg | 5.8% |
| 8482.99.65 | Other | — | 5.8% |
| 8482.99.65.10 | For spherical roller bearings | kg | 5.8% |
| 8482.99.65.30 | For needle bearings | kg | 5.8% |
| 8482.99.65.60 | For other cylindrical roller bearings | kg | 5.8% |
| 8482.99.65.95 | Other | kg | 5.8% |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 8482 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.