HTS 8466
Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 8466.10.01 | Tool holders and self-opening dieheads | — | 3.9% |
| 8466.10.01.10 | Tool holders for forming-type or cutting-type dies | No. | 3.9% |
| 8466.10.01.30 | Holders for replaceable cutting or drill inserts | No. | 3.9% |
| 8466.10.01.75 | Other | No. | 3.9% |
| 8466.20 | Work holders | — | see above |
| 8466.20.10 | For machine tools used in cutting gears | — | 4.6% |
| 8466.20.10.10 | Jigs and fixtures | No. | 4.6% |
| 8466.20.10.90 | Other | No. | 4.6% |
| 8466.20.80 | Other | — | 3.7% |
| 8466.20.80.20 | Jigs and fixtures | No. | 3.7% |
| 8466.20.80.35 | Other | No. | 3.7% |
| 8466.20.80.40 | Jigs and fixtures | No. | 3.7% |
| 8466.20.80.65 | Other | No. | 3.7% |
| 8466.30 | Dividing heads and other special attachments for machines | — | see above |
| 8466.30.10.00 | Dividing heads | No. | 3.7% |
| 8466.30.60 | Machines | — | 2.9% |
| 8466.30.60.40 | For woodworking machines | No. | 2.9% |
| 8466.30.60.85 | Other | No. | 2.9% |
| 8466.30.80.00 | Other | No. | 8% |
| 8466.91 | For machines of heading 8464 | — | see above |
| 8466.91.10.00 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | kg | Free |
| 8466.91.50.00 | Other | No. | Free |
| 8466.92 | For machines of heading 8465 | — | see above |
| 8466.92.10.00 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | kg | Free |
| 8466.92.50 | Other | — | 4.7% |
| 8466.92.50.10 | Of woodworking machines | No. | 4.7% |
| 8466.92.50.90 | Other | No. | 4.7% |
| 8466.93 | For machines of headings 8456 to 8461 | — | see above |
| 8466.93.11.00 | For water-jet cutting machines | No. | Free |
| 8466.93.15 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | — | Free |
| 8466.93.15.30 | For metalworking machine tools for cutting, grinding or finishing gears | kg | Free |
| 8466.93.15.60 | Other | kg | Free |
| 8466.93.30.00 | Of metalworking machine tools for cutting gears | No. | 5.8% |
| 8466.93.53 | Other | — | 4.7% |
| 8466.93.53.40 | Of metalworking machine tools for grinding or finishing gears | No. | 4.7% |
| 8466.93.53.85 | Other | No. | 4.7% |
| 8466.93.60 | Cast-iron parts not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery | — | Free |
| 8466.93.60.30 | For metalworking machine tools for cutting, grinding or finishing gears | kg | Free |
| 8466.93.60.60 | Other | kg | Free |
| 8466.93.75.00 | Of metalworking machine tools for cutting gears | No. | 5.8% |
| 8466.93.96.00 | Parts and accessories of machine tools of subheadings 8456.11, 8456.12, 8456.30, 8457.10, 8458.91, 8459.21, 8459.61 and 8461.50, of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517 or parts of automatic data processing machines | No. | Free |
| 8466.93.98 | Other | — | 4.7% |
| 8466.93.98.40 | Of metalworking machine tools for grinding or finishing gears | No. | 4.7% |
| 8466.93.98.85 | Other | No. | 4.7% |
| 8466.94 | For machines of heading 8462 or 8463 | — | see above |
| 8466.94.20.00 | Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications | kg | Free |
| 8466.94.40.00 | Other | kg | Free |
| 8466.94.65 | Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications | — | 4.7% |
| 8466.94.65.40 | Parts of mechanical transfer presses | No. | 4.7% |
| 8466.94.65.85 | Other | No. | 4.7% |
| 8466.94.85 | Other | — | 4.7% |
| 8466.94.85.40 | Parts of mechanical transfer presses | No. | 4.7% |
| 8466.94.85.85 | Other | No. | 4.7% |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 8466 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.