HTS 8462
Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 8462.11.00 | Closed die forging machines | — | 4.4% |
| 8462.11.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.11.00.30 | Headers and upsetters | No. | 4.4% |
| 8462.11.00.35 | Mechanical transfer presses | No. | 4.4% |
| 8462.11.00.55 | Other | No. | 4.4% |
| 8462.19.00 | Other | — | 4.4% |
| 8462.19.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.19.00.30 | Headers and upsetters | No. | 4.4% |
| 8462.19.00.35 | Mechanical transfer presses | No. | 4.4% |
| 8462.19.00.55 | Other | No. | 4.4% |
| 8462.22.00 | Profile forming machines | — | 4.4% |
| 8462.22.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.22.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.22.00.50 | Other | No. | 4.4% |
| 8462.23.00 | Numerically controlled press brakes | — | 4.4% |
| 8462.23.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.23.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.23.00.50 | Other | No. | 4.4% |
| 8462.24.00 | Numerically controlled panel benders | — | 4.4% |
| 8462.24.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.24.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.24.00.50 | Other | No. | 4.4% |
| 8462.25.00 | Numerically controlled roll forming machines | — | 4.4% |
| 8462.25.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.25.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.25.00.50 | Other | No. | 4.4% |
| 8462.26.00 | Other numerically controlled bending, folding, straightening or flattening machines | — | 4.4% |
| 8462.26.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.26.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.26.00.50 | Other | No. | 4.4% |
| 8462.29.00 | Other | — | 4.4% |
| 8462.29.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.29.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.29.00.30 | Press brakes | No. | 4.4% |
| 8462.29.00.40 | Bending rolls | No. | 4.4% |
| 8462.29.00.50 | Other | No. | 4.4% |
| 8462.32 | Slitting lines and cut-to-length lines | — | see above |
| 8462.32.10 | Numerically controlled | — | 4.4% |
| 8462.32.10.40 | Used or rebuilt | No. | 4.4% |
| 8462.32.10.80 | Other | No. | 4.4% |
| 8462.32.50 | Other | — | 4.4% |
| 8462.32.50.10 | Used or rebuilt | No. | 4.4% |
| 8462.32.50.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.32.50.50 | Other | No. | 4.4% |
| 8462.33.00 | Numerically controlled shearing machines | — | 4.4% |
| 8462.33.00.40 | Used or rebuilt | No. | 4.4% |
| 8462.33.00.80 | Other | No. | 4.4% |
| 8462.39.00 | Other | — | 4.4% |
| 8462.39.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.39.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.39.00.50 | Other | No. | 4.4% |
| 8462.42.00 | Numerically controlled | — | 4.4% |
| 8462.42.00.40 | Used or rebuilt | No. | 4.4% |
| 8462.42.00.80 | Other | No. | 4.4% |
| 8462.49.00 | Other | — | 4.4% |
| 8462.49.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.49.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.49.00.50 | Other | No. | 4.4% |
| 8462.51.00 | Numerically controlled | — | 4.4% |
| 8462.51.00.40 | Used or rebuilt | No. | 4.4% |
| 8462.51.00.80 | Other | No. | 4.4% |
| 8462.59.00 | Other | — | 4.4% |
| 8462.59.00.10 | Used or rebuilt | No. | 4.4% |
| 8462.59.00.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.59.00.50 | Other | No. | 4.4% |
| 8462.61 | Hydraulic presses | — | see above |
| 8462.61.40 | Numerically controlled | — | 4.4% |
| 8462.61.40.30 | Used or rebuilt | No. | 4.4% |
| 8462.61.40.60 | Other | No. | 4.4% |
| 8462.61.80 | Other | — | 4.4% |
| 8462.61.80.30 | Used or rebuilt | No. | 4.4% |
| 8462.61.80.90 | Other | No. | 4.4% |
| 8462.62 | Mechanical presses | — | see above |
| 8462.62.40 | Numerically controlled | — | 4.4% |
| 8462.62.40.10 | Used or rebuilt | No. | 4.4% |
| 8462.62.40.30 | Other | No. | 4.4% |
| 8462.62.50 | Other | — | 4.4% |
| 8462.62.50.30 | Used or rebuilt | No. | 4.4% |
| 8462.62.50.90 | Other | No. | 4.4% |
| 8462.63 | Servo-presses | — | see above |
| 8462.63.40 | Numerically controlled | — | 4.4% |
| 8462.63.40.10 | Used or rebuilt | No. | 4.4% |
| 8462.63.40.30 | Other | No. | 4.4% |
| 8462.63.80 | Other | — | 4.4% |
| 8462.63.80.10 | Used or rebuilt | No. | 4.4% |
| 8462.63.80.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.63.80.60 | Other | No. | 4.4% |
| 8462.69 | Other | — | see above |
| 8462.69.40 | Numerically controlled | — | 4.4% |
| 8462.69.40.10 | Used or rebuilt | No. | 4.4% |
| 8462.69.40.30 | Other | No. | 4.4% |
| 8462.69.80 | Other | — | 4.4% |
| 8462.69.80.10 | Used or rebuilt | No. | 4.4% |
| 8462.69.80.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.69.80.60 | Other | No. | 4.4% |
| 8462.90 | Other | — | see above |
| 8462.90.40 | Numerically controlled | — | 4.4% |
| 8462.90.40.10 | Used or rebuilt | No. | 4.4% |
| 8462.90.40.30 | Other | No. | 4.4% |
| 8462.90.80 | Other | — | 4.4% |
| 8462.90.80.10 | Used or rebuilt | No. | 4.4% |
| 8462.90.80.20 | Other, valued under $3,025 each | No. | 4.4% |
| 8462.90.80.60 | Other | No. | 4.4% |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 8462 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.