HTS 8207
Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 8207.13.00.00 | With working part of cermets | No. | 3.6% |
| 8207.19 | Other, including parts | — | see above |
| 8207.19.30 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | — | 5% |
| 8207.19.30.30 | Percussion rock drill bits | No. | 5% |
| 8207.19.30.60 | Rotary rock drill bits, core bits and reamers | No. | 5% |
| 8207.19.30.90 | Other | No. | 5% |
| 8207.19.60 | Other | — | 2.9% |
| 8207.19.60.30 | Percussion rock drill bits | No. | 2.9% |
| 8207.19.60.65 | With working part of diamonds | No. | 2.9% |
| 8207.19.60.70 | Other | No. | 2.9% |
| 8207.19.60.90 | Other | No. | 2.9% |
| 8207.20.00 | Dies for drawing or extruding metal, and parts thereof | — | 3.9% |
| 8207.20.00.30 | Diamond wire drawing dies | No., kg | 3.9% |
| 8207.20.00.40 | Other dies | No., kg | 3.9% |
| 8207.20.00.70 | Parts | No., kg | 3.9% |
| 8207.30 | Tools for pressing, stamping or punching, and parts thereof | — | see above |
| 8207.30.30 | Suitable for cutting metal, and parts thereof | — | 5.7% |
| 8207.30.30.20 | Tools | No., kg | 5.7% |
| 8207.30.30.50 | Parts | No., kg | 5.7% |
| 8207.30.60 | Not suitable for cutting metal, and parts thereof | — | 2.9% |
| 8207.30.60.32 | Stamping dies not suitable for cutting metal | No., kg | 2.9% |
| 8207.30.60.62 | Metal forming dies, including thread-rolling dies | No., kg | 2.9% |
| 8207.30.60.92 | Other tools | No., kg | 2.9% |
| 8207.30.60.95 | Parts | No., kg | 2.9% |
| 8207.40 | Tools for tapping or threading, and parts thereof | — | see above |
| 8207.40.30.00 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | No. | 5.7% |
| 8207.40.60.00 | Other | No. | 4.8% |
| 8207.50 | Tools for drilling, other than for rock drilling, and parts thereof | — | see above |
| 8207.50.20 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | — | 5% |
| 8207.50.20.30 | Masonry drills | No. | 5% |
| 8207.50.20.45 | Brad point | No. | 5% |
| 8207.50.20.55 | Other | No. | 5% |
| 8207.50.20.70 | For woodworking | No. | 5% |
| 8207.50.20.80 | Other | No. | 5% |
| 8207.50.40 | Suitable for cutting metal, and parts thereof | — | 8.4% |
| 8207.50.40.30 | Twist drills | No. | 8.4% |
| 8207.50.40.60 | Other | No. | 8.4% |
| 8207.50.60.00 | For handtools, and parts thereof | No. | 5.2% |
| 8207.50.80.00 | Other | No. | 2.9% |
| 8207.60.00 | Tools for boring or broaching, and parts thereof | — | 4.8% |
| 8207.60.00.30 | Broaches | No. | 4.8% |
| 8207.60.00.35 | Reamers, except gun reamers | No. | 4.8% |
| 8207.60.00.61 | Other (including parts thereof) | No. | 4.8% |
| 8207.70 | Tools for milling, and parts thereof | — | see above |
| 8207.70.30 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | — | 5% |
| 8207.70.30.30 | End milling cutters | No. | 5% |
| 8207.70.30.40 | Router bits for woodworking | No. | 5% |
| 8207.70.30.60 | Other | No. | 5% |
| 8207.70.60 | Other | — | 2.9% |
| 8207.70.60.30 | End milling cutters | No. | 2.9% |
| 8207.70.60.40 | Router bits not suitable for cutting metal | No. | 2.9% |
| 8207.70.60.60 | Other (including parts) | No. | 2.9% |
| 8207.80 | Tools for turning | — | see above |
| 8207.80.30.00 | With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | No. | 4.8% |
| 8207.80.60.00 | Other | No. | 3.7% |
| 8207.90 | Other interchangeable tools, and parts thereof | — | see above |
| 8207.90.15.00 | Files and rasps, including rotary files and rasps, and parts thereof | doz. | 1.6% |
| 8207.90.30 | Cutting tools with cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | — | 5% |
| 8207.90.30.30 | Hobs and other gear cutting tools | No. | 5% |
| 8207.90.30.75 | Cutterheads with interchangeable tools | No. | 5% |
| 8207.90.30.80 | Other | No. | 5% |
| 8207.90.30.85 | Other | No. | 5% |
| 8207.90.45.00 | Suitable for cutting metal, and parts thereof | No. | 4.8% |
| 8207.90.60.00 | For handtools, and parts thereof | No. | 4.3% |
| 8207.90.75 | Other | — | 3.7% |
| 8207.90.75.45 | Cutterheads with interchangeable tools | No. | 3.7% |
| 8207.90.75.85 | Other | No. | 3.7% |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 8207 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.