HTS 7306
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 7306.11.00 | Welded, of stainless steel | — | Free |
| 7306.11.00.10 | With an outside diameter not exceeding 114.3 mm | kg | Free |
| 7306.11.00.50 | With an outside diameter exceeding 114.3 mm | kg | Free |
| 7306.19 | Other | — | see above |
| 7306.19.10 | Of iron or nonalloy steel | — | Free |
| 7306.19.10.10 | With an outside diameter not exceeding 114.3 mm | kg | Free |
| 7306.19.10.50 | With an outside diameter exceeding 114.3 mm | kg | Free |
| 7306.19.51 | Of alloy steel | — | Free |
| 7306.19.51.10 | With an outside diameter not exceeding 114.3 mm | kg | Free |
| 7306.19.51.50 | With an outside diameter exceeding 114.3 mm | kg | Free |
| 7306.21 | Welded of stainless steel | — | see above |
| 7306.21.30.00 | Threaded or coupled | kg | Free |
| 7306.21.40.00 | Other | kg | Free |
| 7306.21.80 | Tubing | — | Free |
| 7306.21.80.10 | Imported with coupling | kg | Free |
| 7306.21.80.50 | Other | kg | Free |
| 7306.29 | Other | — | see above |
| 7306.29.10 | Threaded or coupled | — | Free |
| 7306.29.10.30 | Imported with coupling | kg | Free |
| 7306.29.10.90 | Other | kg | Free |
| 7306.29.20.00 | Other | kg | Free |
| 7306.29.31.00 | Threaded or coupled | kg | Free |
| 7306.29.41.00 | Other | kg | Free |
| 7306.29.60 | Of iron or nonalloy steel | — | Free |
| 7306.29.60.10 | Imported with coupling | kg | Free |
| 7306.29.60.50 | Other | kg | Free |
| 7306.29.81 | Other | — | Free |
| 7306.29.81.10 | Imported with coupling | kg | Free |
| 7306.29.81.50 | Other | kg | Free |
| 7306.30 | Other, welded, of circular cross section, of iron or nonalloy steel | — | see above |
| 7306.30.10 | Having a wall thickness of less than 1.65 mm | — | Free |
| 7306.30.10.10 | Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit | kg | Free |
| 7306.30.10.90 | Other | kg | Free |
| 7306.30.30.00 | Tapered steel pipes and tubes principally used as parts of illuminating articles | kg | Free |
| 7306.30.50 | Other | — | Free |
| 7306.30.50.10 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn | kg | Free |
| 7306.30.50.15 | Other, cold-drawn | kg | Free |
| 7306.30.50.20 | Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm | kg | Free |
| 7306.30.50.26 | With an outside diameter not exceeding 50.8 mm | kg | Free |
| 7306.30.50.27 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | kg | Free |
| 7306.30.50.28 | Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit | kg | Free |
| 7306.30.50.31 | With an outside diameter not exceeding 50.8 mm | kg | Free |
| 7306.30.50.33 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | kg | Free |
| 7306.30.50.35 | Tube and pipe hollows for redrawing | kg | Free |
| 7306.30.50.41 | With an outside diameter not exceeding 50.8 mm | kg | Free |
| 7306.30.50.43 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | kg | Free |
| 7306.30.50.56 | With an outside diameter not exceeding 50.8 mm | kg | Free |
| 7306.30.50.57 | With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | kg | Free |
| 7306.30.50.85 | Galvanized | kg | Free |
| 7306.30.50.90 | Other | kg | Free |
| 7306.40 | Other, welded, of circular cross section, of stainless steel | — | see above |
| 7306.40.10 | Having a wall thickness of less than 1.65 mm | — | Free |
| 7306.40.10.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7306.40.10.15 | Other | kg | Free |
| 7306.40.10.90 | Other | kg | Free |
| 7306.40.50 | Having a wall thickness of 1.65 mm or more | — | Free |
| 7306.40.50.05 | Of high-nickel alloy steel | kg | Free |
| 7306.40.50.15 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn | kg | Free |
| 7306.40.50.40 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | kg | Free |
| 7306.40.50.42 | Containing less than 15 percent by weight of chromium | kg | Free |
| 7306.40.50.44 | Other | kg | Free |
| 7306.40.50.62 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | Free |
| 7306.40.50.64 | Other | kg | Free |
| 7306.40.50.80 | Other | kg | Free |
| 7306.40.50.85 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | kg | Free |
| 7306.40.50.90 | Other | kg | Free |
| 7306.50 | Other, welded, of circular cross section, of other alloy steel | — | see above |
| 7306.50.10.00 | Having a wall thickness of less than 1.65 mm | kg | Free |
| 7306.50.30.00 | Tapered pipes and tubes of steel principally used as parts of illuminating articles | kg | Free |
| 7306.50.50 | Other | — | Free |
| 7306.50.50.10 | Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn | kg | Free |
| 7306.50.50.30 | Other, cold-drawn or cold-rolled (cold- reduced) | kg | Free |
| 7306.50.50.50 | With an outside diameter not exceeding 114.3 mm | kg | Free |
| 7306.50.50.70 | With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm | kg | Free |
| 7306.61 | Of square or rectangular cross section | — | see above |
| 7306.61.10.00 | Of iron or nonalloy steel | kg | Free |
| 7306.61.30.00 | Of alloy steel | kg | Free |
| 7306.61.50.00 | Of iron or nonalloy steel | kg | Free |
| 7306.61.70 | Of alloy steel | — | Free |
| 7306.61.70.30 | Of stainless steel | kg | Free |
| 7306.61.70.60 | Other | kg | Free |
| 7306.69 | Of other noncircular cross section | — | see above |
| 7306.69.10.00 | Of iron or nonalloy steel | kg | Free |
| 7306.69.30.00 | Of alloy steel | kg | Free |
| 7306.69.50.00 | Of iron or nonalloy steel | kg | Free |
| 7306.69.70 | Of alloy steel | — | Free |
| 7306.69.70.30 | Of stainless steel | kg | Free |
| 7306.69.70.60 | Other | kg | Free |
| 7306.90 | Other | — | see above |
| 7306.90.10.00 | Of iron or nonalloy steel | kg | Free |
| 7306.90.50.00 | Of alloy steel | kg | Free |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 7306 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.