HTS 4412
Plywood, veneered panels and similar laminated wood
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 4412.10 | Of bamboo | — | see above |
| 4412.10.05.00 | Plywood | m3 | 8% |
| 4412.10.90.00 | Other | m3 | Free |
| 4412.31 | With at least one outer ply of tropical wood | — | see above |
| 4412.31.06 | With a face ply of birch (Betula spp.) | — | Free |
| 4412.31.06.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | Free |
| 4412.31.06.40 | Not surface covered | m3 | Free |
| 4412.31.06.60 | Other | m3 | Free |
| 4412.31.26 | With a face ply of Spanish cedar (Cedrela spp.) or walnut (Juglans spp) | — | 8% |
| 4412.31.26.10 | With a face ply of Spanish cedar (Cedrela spp.) | m3 | 8% |
| 4412.31.26.20 | With a face ply of walnut (Juglans spp.) | m3 | 8% |
| 4412.31.42.00 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | 8% |
| 4412.31.45.00 | Panels not exceeding 3.6 mm in thickness and exceeding 1.2 m in width and 2.2 m in length | m3 | 8% |
| 4412.31.48 | Other | — | 8% |
| 4412.31.48.50 | Panels not exceeding 3.6 mm in thickness and not exceeding 1.2 m in width and 2.2 m in length | m3 | 8% |
| 4412.31.48.60 | Dark Red Meranti, Light Red Meranti or White Lauan (Luan) (Shorea spp.) | m3 | 8% |
| 4412.31.48.63 | Limba (Terminalia spp.), also known as Terminalia and Nargusta | m3 | 8% |
| 4412.31.48.66 | Virola (Virola spp.) | m3 | 8% |
| 4412.31.48.69 | Other | m3 | 8% |
| 4412.31.48.75 | Wood flooring | m3 | 8% |
| 4412.31.48.80 | Other | m3 | 8% |
| 4412.31.52 | Other | — | 8% |
| 4412.31.52.25 | Wood flooring | m3 | 8% |
| 4412.31.52.35 | With a face ply of sen (Kalopanax spp.) | m3 | 8% |
| 4412.31.52.55 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | 8% |
| 4412.31.52.60 | Albizia (Albizia spp.), also known as Falcata, Batai and Suar wood | m3 | 8% |
| 4412.31.52.62 | Bintangor (Calophyllum spp.) | m3 | 8% |
| 4412.31.52.64 | Mersawa (Anisoptera spp.) | m3 | 8% |
| 4412.31.52.66 | Parica (Schizolobium spp.), also known as Pinho Cuiabano, Firetree and Guapuruvu | m3 | 8% |
| 4412.31.52.68 | Pencil cedar, Nyatoh (Palaquium spp.) | m3 | 8% |
| 4412.31.52.70 | Other | m3 | 8% |
| 4412.31.52.75 | Other | m3 | 8% |
| 4412.31.61.00 | With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose | m3 | 8% |
| 4412.31.92.00 | Other | m3 | 8% |
| 4412.33 | Other, with at least one outer ply of nonconiferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.), chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.), oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.), robinia (Robinia spp.), tulipwood (Liriodendron spp.) or walnut (Juglans spp.) | — | see above |
| 4412.33.06 | With a face ply of birch (Betula spp.) | — | Free |
| 4412.33.06.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | Free |
| 4412.33.06.40 | Not surface covered | m3 | Free |
| 4412.33.06.65 | Wood flooring | m3 | Free |
| 4412.33.06.70 | Other | m3 | Free |
| 4412.33.26 | With a face ply of walnut (Juglans spp.) | — | 5.1% |
| 4412.33.26.25 | Wood flooring | m3 | 5.1% |
| 4412.33.26.30 | Other | m3 | 5.1% |
| 4412.33.32 | Other | — | 8% |
| 4412.33.32.25 | Wood flooring | m3 | 8% |
| 4412.33.32.35 | With a face ply of sen (Kalopanax spp.) | m3 | 8% |
| 4412.33.32.55 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | 8% |
| 4412.33.32.65 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | 8% |
| 4412.33.32.75 | Not surface covered | m3 | 8% |
| 4412.33.32.85 | Other | m3 | 8% |
| 4412.33.57.00 | Other | m3 | 8% |
| 4412.34 | Other, with at least one outer ply of nonconiferous wood not specified under subheading 4412.33 | — | see above |
| 4412.34.26.00 | With a face ply of Spanish cedar (Cedrela spp.) | m3 | 5.1% |
| 4412.34.32 | Other | — | 8% |
| 4412.34.32.25 | Wood flooring | m3 | 8% |
| 4412.34.32.35 | With a face ply of sen (Kalopanax spp.) | m3 | 8% |
| 4412.34.32.55 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | 8% |
| 4412.34.32.65 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | 8% |
| 4412.34.32.75 | Not surface covered | m3 | 8% |
| 4412.34.32.85 | Other | m3 | 8% |
| 4412.34.57.00 | Other | m3 | 8% |
| 4412.39 | Other, with both outer plies of coniferous wood | — | see above |
| 4412.39.10.00 | With a face ply of Parana pine (Araucaria angustifolia) | m3 | Free |
| 4412.39.30.00 | With a face ply of European red pine (Pinus silvestris) | m3 | 3.4% |
| 4412.39.40 | Other | — | 8% |
| 4412.39.40.11 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | 8% |
| 4412.39.40.12 | Fully sanded on at least one face, but not further processed | m3 | 8% |
| 4412.39.40.19 | Other | m3 | 8% |
| 4412.39.40.31 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | 8% |
| 4412.39.40.32 | Fully sanded on at least one face, but not further processed | m3 | 8% |
| 4412.39.40.39 | Other | m3 | 8% |
| 4412.39.40.51 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | 8% |
| 4412.39.40.52 | Fully sanded on at least one face, but not further processed | m3 | 8% |
| 4412.39.40.59 | Other | m3 | 8% |
| 4412.39.40.61 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | 8% |
| 4412.39.40.62 | Fully sanded on at least one face, but not further processed | m3 | 8% |
| 4412.39.40.69 | Other | m3 | 8% |
| 4412.39.50 | Other | — | 5.1% |
| 4412.39.50.10 | With at least one outer ply of Douglas fir (Pseudotsuga menziesii) | m3 | 5.1% |
| 4412.39.50.30 | With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine) (Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana) | m3 | 5.1% |
| 4412.39.50.50 | Other | m3 | 5.1% |
| 4412.41.00.00 | With at least one outer ply of tropical wood | m3 | Free |
| 4412.42.00.00 | Other, with at least one outer ply of nonconiferous wood | m3 | Free |
| 4412.49.00.00 | Other, with both outer plies of coniferous wood | m3 | Free |
| 4412.51 | With at least one outer ply of tropical wood | — | see above |
| 4412.51.10 | With a face ply of birch (Betula spp.) | — | Free |
| 4412.51.10.30 | Not surface covered | m3 | Free |
| 4412.51.10.50 | Other | m3 | Free |
| 4412.51.31 | Other | — | 8% |
| 4412.51.31.05 | Wood flooring | m2, m3 | 8% |
| 4412.51.31.11 | With a face ply of Spanish cedar (Cedrela spp.) | m2, m3 | 8% |
| 4412.51.31.21 | With a face ply of walnut (Juglans spp.) | m2, m3 | 8% |
| 4412.51.31.41 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m2, m3 | 8% |
| 4412.51.31.61 | Not surface covered | m2, m3 | 8% |
| 4412.51.31.75 | Other | m2, m3 | 8% |
| 4412.51.41.00 | Other | m3 | 8% |
| 4412.51.51.00 | Other | m3 | Free |
| 4412.52 | Other, with at least one outer ply of nonconiferous wood | — | see above |
| 4412.52.10 | With a face ply of birch (Betula spp.) | — | Free |
| 4412.52.10.30 | Not surface covered | m3 | Free |
| 4412.52.10.50 | Other | m3 | Free |
| 4412.52.31 | Other | — | 8% |
| 4412.52.31.05 | Wood flooring | m2, m3 | 8% |
| 4412.52.31.21 | With a face ply of walnut (Juglans spp.) | m2, m3 | 8% |
| 4412.52.31.61 | Not surface covered | m2, m3 | 8% |
| 4412.52.31.75 | Other | m2, m3 | 8% |
| 4412.52.41.00 | Other | m3 | 8% |
| 4412.52.51.00 | Other | m3 | Free |
| 4412.59 | Other, with both outer plies of coniferous wood | — | see above |
| 4412.59.60.00 | With a face ply of Parana pine (Araucaria angustifolia) | m3 | Free |
| 4412.59.70.00 | With a face ply of European red pine (Pinus silvestris) | m3 | 3.4% |
| 4412.59.80.00 | Other | m3 | 8% |
| 4412.59.90.00 | Other | m3 | 5.1% |
| 4412.59.95.00 | Other | m3 | Free |
| 4412.91 | With at least one outer ply of tropical wood | — | see above |
| 4412.91.06.00 | Containing at least one layer of particle board | m3 | Free |
| 4412.91.10 | With a face ply of birch (Betula spp.) | — | Free |
| 4412.91.10.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | Free |
| 4412.91.10.30 | Not surface covered | m3 | Free |
| 4412.91.10.40 | Other | m3 | Free |
| 4412.91.31 | Other | — | 8% |
| 4412.91.31.10 | With a face ply of Spanish cedar (Cedrela spp.) | m3 | 8% |
| 4412.91.31.20 | With a face ply of walnut (Juglans spp.) | m3 | 8% |
| 4412.91.31.30 | With a face ply of sen (Kalopanax spp.) | m3 | 8% |
| 4412.91.31.40 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | 8% |
| 4412.91.31.50 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length | m3 | 8% |
| 4412.91.31.60 | Other, not surface covered | m3 | 8% |
| 4412.91.31.70 | Other | m3 | 8% |
| 4412.91.41.00 | Other | m3 | 8% |
| 4412.91.51 | Other | — | Free |
| 4412.91.51.05 | Wood flooring | m3 | Free |
| 4412.91.51.15 | Other | m3 | Free |
| 4412.92 | Other, with at least one outer ply of nonconiferous wood | — | see above |
| 4412.92.07.00 | Containing at least one layer of particle board | m3 | Free |
| 4412.92.11 | With a face ply of birch (Betula spp.) | — | Free |
| 4412.92.11.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | Free |
| 4412.92.11.30 | Not surface covered | m3 | Free |
| 4412.92.11.40 | Other | m3 | Free |
| 4412.92.31 | Other | — | 8% |
| 4412.92.31.20 | With a face ply of walnut (Juglans spp.) | m3 | 8% |
| 4412.92.31.50 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length | m3 | 8% |
| 4412.92.31.60 | Other, not surface covered | m3 | 8% |
| 4412.92.31.70 | Other | m3 | 8% |
| 4412.92.42.00 | Other | m3 | 8% |
| 4412.92.52 | Other | — | Free |
| 4412.92.52.05 | Wood flooring | m3 | Free |
| 4412.92.52.15 | Other | m3 | Free |
| 4412.99 | Other, with both outer plies of coniferous wood | — | see above |
| 4412.99.58.00 | Containing at least one layer of particle board | m3 | Free |
| 4412.99.61.00 | With a face ply of Parana pine (Araucaria angustifolia) | m3 | Free |
| 4412.99.71.00 | With a face ply of European red pine (Pinus silvestris) | m3 | 3.4% |
| 4412.99.81.00 | Other | m3 | 8% |
| 4412.99.91.00 | Other | m3 | 5.1% |
| 4412.99.97.00 | Other | m3 | Free |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 4412 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.