HTS 4011
New pneumatic tires, of rubber
| General rate | Not stated for this line What most imports pay — countries with normal trade relations, which is nearly all of them. |
|---|---|
| Special rate | Not stated for this line Only under a trade programme or agreement, and only if the goods qualify. The codes name the programmes. |
| Column 2 rate | Not stated for this line Only for the few countries without normal trade relations. |
This line states no general duty rate, and none is inherited from the lines above it. That is not the same as duty-free: lines in Chapters 98 and 99 are provisions and qualifiers rather than ordinary commodities, and a rate may be stated elsewhere. Check the heading before assuming anything.
Additional duties may apply
This line references Chapter 99, where Section 301, Section 232 and other additional duties live. Those are charged on top of the general rate above and depend on where the goods were made. The rate shown here is therefore not the whole story for every origin.
Statistical breakouts
The 10-digit lines under this code. They are reporting categories; the duty is the one above unless a line states its own.
| Code | Description | Units | Rate |
|---|---|---|---|
| 4011.10 | Of a kind used on motor cars (including station wagons and racing cars) | — | see above |
| 4011.10.10 | Radial | — | 4% |
| 4011.10.10.10 | Having a rim diameter of 33.02 cm (13 inches) or less | No. | 4% |
| 4011.10.10.20 | Having a rim diameter greater than 33.02 cm (13 inches) but not more than 35.56 cm (14 inches) | No. | 4% |
| 4011.10.10.30 | Having a rim diameter greater than 35.56 cm (14 inches) but not more than 38.10 cm (15 inches) | No. | 4% |
| 4011.10.10.40 | Having a rim diameter greater than 38.10 cm (15 inches) but not more than 40.64 cm (16 inches) | No. | 4% |
| 4011.10.10.50 | Having a rim diameter greater than 40.64 cm (16 inches) but not more than 43.18 cm (17 inches) | No. | 4% |
| 4011.10.10.60 | Having a rim diameter greater than 43.18 cm (17 inches) but not more than 45.72 cm (18 inches) | No. | 4% |
| 4011.10.10.70 | Having a rim diameter greater than 45.72 cm (18 inches) | No. | 4% |
| 4011.10.50.00 | Other | No. | 3.4% |
| 4011.20 | Of a kind used on buses or trucks | — | see above |
| 4011.20.10 | Radial | — | 4% |
| 4011.20.10.05 | Light truck | No. | 4% |
| 4011.20.10.15 | Other | No. | 4% |
| 4011.20.10.25 | For use on a rim measuring 40.6 cm or more in diameter | No. | 4% |
| 4011.20.10.35 | Other | No. | 4% |
| 4011.20.50 | Other | — | 3.4% |
| 4011.20.50.10 | Light truck | No. | 3.4% |
| 4011.20.50.20 | Other | No. | 3.4% |
| 4011.20.50.30 | For use on a rim measuring 40.6 cm or more in diameter | No. | 3.4% |
| 4011.20.50.50 | Other | No. | 3.4% |
| 4011.30.00 | Of a kind used on aircraft | — | Free |
| 4011.30.00.10 | For use in civil aircraft | No. | Free |
| 4011.30.00.50 | Other | No. | Free |
| 4011.40.00.00 | Of a kind used on motorcycles | No. | Free |
| 4011.50.00.00 | Of a kind used on bicycles | No. | Free |
| 4011.70.00 | Of a kind used on agricultural or forestry vehicles and machines | — | Free |
| 4011.70.00.10 | Having a "herring-bone" or similar tread | No. | Free |
| 4011.70.00.50 | Other | No. | Free |
| 4011.80 | Of a kind used on construction, mining or industrial handling vehicles and machines | — | see above |
| 4011.80.10 | Having a "herring-bone" or similar tread | — | Free |
| 4011.80.10.10 | Having a rim size not exceeding 61 cm | No. | Free |
| 4011.80.10.20 | Having a rim size exceeding 61 cm | No. | Free |
| 4011.80.20 | Radial | — | 4% |
| 4011.80.20.10 | Having a rim size not exceeding 61 cm | No. | 4% |
| 4011.80.20.20 | Having a rim size exceeding 61 cm | No. | 4% |
| 4011.80.80 | Other | — | 3.4% |
| 4011.80.80.10 | Having a rim size not exceeding 61 cm | No. | 3.4% |
| 4011.80.80.20 | Having a rim size exceeding 61 cm | No. | 3.4% |
| 4011.90 | Other | — | see above |
| 4011.90.10 | Having a "herring-bone" or similar tread | — | Free |
| 4011.90.10.10 | Of a kind used on golf carts, all-terrain vehicles, and for turf, lawn and garden, and trailer applications | No. | Free |
| 4011.90.10.50 | Other | No. | Free |
| 4011.90.20 | Radial | — | 4% |
| 4011.90.20.10 | Of a kind used on golf carts, all-terrain vehicles, and for turf, lawn and garden, and trailer applications | No. | 4% |
| 4011.90.20.50 | Other | No. | 4% |
| 4011.90.80 | Other | — | 3.4% |
| 4011.90.80.10 | Of a kind used on golf carts, all-terrain vehicles, and for turf, lawn and garden, and trailer applications | No. | 3.4% |
| 4011.90.80.50 | Other | No. | 3.4% |
What changed
No recorded change to this line since we began reading the schedule daily. That is the ordinary state: USITC revises it fifteen to eighteen times a year, and most codes are untouched in any given revision.
Email me when this code changes
One email if the duty on 4011 moves, or the line is reworded or withdrawn. USITC publishes revisions without a calendar, and a rate change applies to goods entered from the day it takes effect.
Before you rely on this
Classification and the duties that finally apply to a shipment are a licensed customs broker's call. This page publishes the schedule as USITC does; it does not calculate what an entry will cost.
Source: Harmonized Tariff Schedule of the United States, U.S. International Trade Commission (public domain). Re-checked daily.